ISO 9001:2015 | MSME | ZED Bronze Certified

Certified Air Receiver Manufacturer & Supplier in Kolkata

ISO 9001:2015 TUV certified and serving industries across Pan India since 2003.

View All Products
0

Years Experience

0

Happy Clients

0

Countries Served

Energy-efficient Air Receiver Manufacturer in Kolkata

Compressed air demand in industrial setups rarely stays constant, and systems without proper storage face frequent pressure drops during peak usage. This results in repeated compressor cycling, unstable airflow at the point of use and increased energy consumption across operations. These fluctuations over time put additional load on the compressor increasing maintenance cost and reducing the life of the equipment.

Frank Compressors supplies energy efficient air receivers in Kolkata, built under ISO certified manufacturing standards and in compliance with the EEC/97/23 pressure vessel standard. These receivers are designed to improve system performance by storing compressed air, maintaining consistent line pressure, and reducing unnecessary compressor cycling to control energy usage. Available up to 30,000 litres and 50 bar, units are configured for different pressure levels, space constraints, and application needs across industrial setups.

Why Air Receivers
Are Essential for
Industries in Kolkata

Factories and workshops in Kolkata run compressed air systems with varying demand over long shifts. Without an air receiver in Kolkata, compressors cycle often, causing pressure drops, higher energy use, and increased wear on equipment.

Call Now

Steady Pressure via the Shift

The air receiver is a buffer that retains spikes in demand. It keeps a steady outlet pressure without overworking the compressor.

Less Wear, Fewer Compressor Cycles

Stored air reduces frequent load-unload cycles, lowering energy use and improving compressor service life.

Moisture Separation Before the Dryer

As air cools in the tank, moisture condenses and is drained, improving dryer performance and protecting downstream equipment.

Key Features of Frank Compressor’s Air Receivers

  • Built to EEC/97/23 pressure vessel standards for safe operation
  • Capacity range up to 30,000 litres for varied applications
  • Pressure ratings up to 50 bar for high-pressure systems
  • Vertical and horizontal configurations based on space constraints
  • Flanged connections above 2 inch for secure installation
  • Safety valve for protection against over-pressure
  • Pressure gauge for continuous monitoring
  • Drain valve for condensate removal
  • Heavy-duty steel construction for long service life
  • Protective coatings for humid and corrosive environments
  • Custom sizing and fittings based on requirement
  • Non-standard configurations available on request

Available Capacities for Kolkata Industries

Frank Compressors manufactures and supplies air receivers across a wide capacity range for direct supply to Kolkata and West Bengal.

50 Litre Air Receiver
100 Litre Air Receiver
200 Litre Air Receiver
300 Litre Air Receiver
500 Litre Air Receiver
750 Litre Air Receiver
1000 Litre Air Receiver
2000 Litre Air Receiver
5000 Litre Air Receiver
10,000 Litre Air Receiver
Up to 30,000 Litre Air Receiver
Custom capacities available on factory consultation

Enquiry For Compressor

0

Happy Clients

0

Dealers

How an Air Receiver Works?

01

Compressed Air Entry

Hot compressed air enters the tank where internal volume slows the flow and cooling begins.

02

Cooling & Moisture Settlement

The moisture condenses and collects at the bottom when the air cools, removed through the drain valve to keep the system dry.

03

Pressure Buffering

The receiver stores air at line pressure and releases it in sudden demand without a drop in pressure and without overloading the compressor.

04

Pressure Monitoring & Safety

A pressure gauge shows the operating levels and a safety valve releases excess pressure to avoid damaging the system.

05

Air Delivery

Cooled and stabilised air exits to the distribution line, ensuring steady pressure for downstream equipment.

Technical Specifications

Model Capacity(Litres) Dimensions mm θ Connections
A B D H i-O Drain (d) Sf. Valve Pr. Gauge
ARV 500 500 543 965 660 1900 1” BSP ½” ½” 1/4"
ARV 1000 1000 632 1135 850 2275 1½” BSP ½” 3/4" 3/8"
ARV 1500 1500 900 350 1062 2400 2"NB ½” 3/4" 3/8"
ARV 2000 2000 900 350 1200 2400 2” NB ½” 1" 3/8"
ARV 2500 2500 900 350 1250 2700 2” NB ½” 1” 3/8”
ARV 3000 3000 900 350 1300 2800 3” NB ½” 1” 3/8”
ARV 4000 4000 900 350 1450 3110 4” NB ½” 1” 3/8”
ARV 5000 5000 900 350 1600 3100 4” NB 1” 1” 3/8”
ARV 6000 6000 900 350 1600 3600 4” NB 1” 1” 3/8”
ARV 8000 8000 900 350 1600 4600 4” NB 1” 1” 3/8”
ARV 10000 10000 900 350 1600 5600 4” NB 1” 1” 3/8”
Sectors

Industries We Supply Air Receivers to in Kolkata

Utility Systems & Power Plants

Air receivers are used in power and utility setups to maintain stable pressure for control systems, actuators, and uninterrupted plant operations.

Process & Chemical Industries

Air receivers are an integral part of chemical units to meet the changing demand in process lines and to provide a steady pressure for dosing, mixing and control systems.

Surface Finishing Systems & Paint Booths

Air receivers are used in surface finishing units to maintain a uniform pressure during spray coating which is essential to avoid finish defects caused by pressure variation.

Glass & Ceramic Manufacturing

The forming and handling of glass and ceramic units require a steady supply of compressed air, and receivers are used to prevent sudden loss of pressure during production.

Warehousing & Logistics Facility

Compressed air for packaging, sorting and pneumatic handling in warehouses. Air receivers to support peak load without system instability.

Rubber & Tyre Processing Units

Air receivers are also required for moulding and curing operations in rubber and tyre units where demand varies greatly.

Electronics & Assembly Units

Controlled air pressure is critical to assembly and cleaning in the electronics manufacturing industry. Air receivers provide the steady delivery required.

Smart Control and Remote Monitoring

Modern compressed air systems require consistent visibility to maintain stable pressure and avoid performance issues across continuous operations. Monitoring capability helps track system behaviour without relying on manual inspection.

  • Continuous pressure visibility to maintain stable air supply across operations
  • System performance tracking to identify irregular load and response patterns
  • Early indication of operating deviations to prevent production impact
  • Maintenance scheduling support based on actual usage conditions
  • Centralised monitoring for multiple compressors and air receivers in one system
  • Remote system access through network connectivity for off-site supervision
  • Operational data recording for analysing efficiency and system performance

These capabilities support better energy management, improved system reliability, and controlled operation across industrial facilities.

Why frank?

Why Choose Frank Compressors for Air Receivers in Kolkata?

EEC/97/23 Certified Construction

Our every air receiver is built to EEC/97/23 pressure vessel standards and tested before dispatch. Industries in Kolkata receive a compliant, certified vessel that meets safety and regulatory requirements.

Wide Capacity and Pressure Range

With capacities up to 30,000 litres and pressure ratings up to 50 bar, we cover everything from small workshop tanks to large multi-compressor industrial storage systems.

Customisation Available

Special coatings for corrosive environments, non-standard sizes, alternate fittings, and flanged connections above 2 inch are all available based on your facility requirements.

Buy Air Receivers Directly from Frank Compressors in Kolkata

Tell us your compressor capacity, required pressure rating, available space, and industry type. Frank Compressors technical team will recommend the right air receiver size and configuration for your Kolkata facility.

Call Whatsapp
FAQ

Frequently Asked Questions on Air Receivers in Kolkata

It happens when demand spikes faster than supply. The compressor can’t keep up instantly. An air receiver stores air and releases it at peak, so line pressure doesn’t dip.

Watch the compressor, if it keeps loading often or tools slow down during peak use, the receiver is likely small. Size should match CFM, usage pattern, and shift load.

A 6 to 10 times compressor CFM is a starting point. Actual size depends on how demand varies, required pressure, and how long the system runs.

Frequent load cycles waste power. With storage in place, the compressor runs more evenly, which brings down overall energy use over time.

Usually after the compressor and before the dryer. That position helps stabilize pressure and lets initial moisture drop out before air moves further.

Yes, and quite noticeably. Moisture buildup is higher, so draining becomes routine. In many setups, internal protection also matters to avoid corrosion.

In most cases, yes. As long as pressure rating and capacity match, it integrates without major changes to the system.

Draining needs to be frequent due to humidity. Inspection is simple but important, mainly checking for corrosion, leaks, and valve condition.

Depends on space. Vertical works where floor area is tight but height is available. Horizontal fits better in low-height or outdoor setups.
Brochure

Enquiry For Compressor